Talaria XXX Carbon Fiber Wrap Kit
Shipping calculated at checkout
9999854 in stock
LBX/ERIDE Moto Foot Brake
Ultra Brake Kit for LBX / E-Ride
Upgrade your rear braking system with a motorcycle-style foot brake setup designed for the Surron Light Bee X (LBX) and E-Ride Pro.
Kit Includes:
➤Pre-bled hydraulic brake system with DOT 5.1 brake fluid
➤1× Ultra Bee brake caliper
➤1× Moto foot brake assembly
➤1× Moto brake line
➤Ready to bolt up and ride
⚠️ IMPORTANT: READ BEFORE YOU BUY — FITMENT GUIDE
To avoid returns and installation issues, please review these compatibility requirements before ordering. Bracket and brake configuration compatibility is highly specific to your bike setup.
🔧 Compatible With:
➤Surron Light Bee X (LBX): Direct fit for standard frames/swingarms.
➤E-Ride Pro SS 2.0 (2024–2025+): Fits the frame axle slot but requires proper alignment and spacing.
➤Single-Caliper Configuration: Designed for riders running ONE rear caliper controlled by the foot brake.
❌ NOT Compatible With:
➤Dual-Caliper Setups: This is a single-caliper bracket only and does not provide mounting points for two rear calipers. If you want to retain your handbrake while adding a foot brake, a dual-caliper bracket is required.
➤Oversized Moto Calipers: The single-caliper bracket is designed for an OEM/stock bicycle-style hydraulic caliper or compatible drop-in replacements such as Hope, Hayes, or Lewis. It is not designed for large motorcycle-style calipers, including the Surron Ultra Bee rear caliper.
➤Direct E-Ride Pro OEM Frame Brackets: This bracket replaces/modifies the existing brake carrier arrangement. It does not directly bolt onto the stock E-Ride Pro 2.0 factory caliper mount without replacing the bracket.
⚙️ Installation & Technical Notes
Rotor Clearance: Depending on your wheel, hub, and spoke configuration, minor shims or washers may be required to properly center the caliper and prevent spoke or rotor interference.
Hand-Brake Configuration: The single-caliper setup dedicates the rear caliper to the foot brake. If you want both hand and foot braking, you must use a compatible dual-caliper bracket.
240mm Rotor Required: Our moto brake brackets are designed specifically for 240mm moto brake rotors. Verify rotor compatibility before ordering.
Professional Installation Recommended: Swingarm geometry, wheel offsets, and spacing can vary by model year. Professional installation is strongly recommended to ensure proper alignment, braking performance, and rider safety.
⚠️ Please verify your exact bike model, year, brake configuration, bracket type, and rotor compatibility before purchasing.
The Talaria XXX Carbon Fiber Kit features the highest quality carbon fiber cut-outs for each plastic piece on the Talaria XXX. Sold as a kit or individually, these wraps are the cleanest carbon fiber released for the bike, with the weaving changing visually depending on the angle. Fully mod the stock side panel, motor cover, ignition, horn cover, and rear fender to look aggressive, yet sleek.
‼️THIS PRODUCT IS DIY‼️
AVAILABLE IN MULTIPLE COLORS/STYLES!
HEAT VINYL UP TO ACTIVATE ADHESIVE
THESE PARTS COME AS SQUARES BECAUSE VINYL IS NOTHING LIKE A DECAL OR STICKER, HEAT IT UP AND PULL IT OVER EACH PART TO STICK. Parts don't come labeled to keep the surface of the wrap intact, match up pieces of wrap depending on size with corresponding part.
‼️ BIGGEST CUTOUT IS FOR THE MOTOR COVER ATTACHED TO THE SIDE PANEL !!
NOTE: Holes for all bolting places must be poked out using a knife or a sharp object so that the plastics can be threaded back into the bike. Edges of wrap are also recommended to be cut after installed on plastic. Wraps don't come labeled, match the sizing up with the part. cutouts of various sizes must be cut out for the following parts and places:
Ignition cover: Button
Horn cover: Hole for horn
Rear fender: bottom section
Motor cover/Side panel: Charging hole
Ships Fast From Florida
We stock products in Fort Myers, FL and ship fast nationwide. No overseas delays, no weeks of waiting — just real parts, ready to go.
No Drop Shipping
Everything on TXC Designs is stocked and shipped by us. You get fast shipping, real support, and parts that actually fit.
They love us
Fitment was perfect and everything came exactly as described. TXC shipping was fast too.
Jimmy Gilzean
X
Straight up the best mod I’ve done. Bike feels planted and the wheels look insane in person.
Brett Smith
Quality is way better than I expected. Zero issues and the bike rides completely different on the street.
